KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers

KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers

KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • KAA10CL0 25.4*34.925*4.7625mm thin section deep groove ball bearing manufacturers
  • Bearing:KAA10CL0
  • NTN:KRS010
  • FAG:CSEAA010
  • ID:1.00 in
  • OD:1.375 in
  • Height:0.1875 inch
  • Co:188
  • Cr:290
  • weight:0.26 lbs
  • Brand:Monton
  • Packing:Single box
  • MOQ:1PCS
  • Delivery:stock
  • Oringin:Luoyang
Inquiry Now


thin section deep groove ball bearing

KAA10CL0 

MKA  seriesInterchange(inch/mm)    DimensionBasic Cap.Weight
Bearings TypeNTNKAYDONdDL1L2CorCrKg
MKAA10CL0KRS010KAA10CL011.3751.1421.23612906700.012
25.434.9252931.4


Open Reali-Slim Bearing Selections

Type A - Angular contact 

     A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snap-over assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle. Stock bearings are individual units and when purchased as such must be adjusted at installation to desired running clearance or preload. If preferred, matched sets are available. Kaydon also offers matched spacers for applications requiring extra precision. Kaydon can provide this service direct from the factory.