ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing

ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing

ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing
  • Bearing:ZKLN4075-2RS-2AP
  • d:75mm
  • D:75mm
  • B:68mm
  • Ca:77,000 N
  • C0a:202,000 N
  • Cua:12,300 N
  • Weight:1.3KG
  • Application:Machines tools
  • Customers:MAG,DMG,etc
  • Oringinal:Luoyang
  • Packing:Single box
  • Price:Inquiry
Inquiry Now

ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing

ZKLN4075-2RS-2AP 40*75*68mm Thrust Angular Contact Ball Bearing


DesignationDimensionsMounting   dimensionsBasic load ratings
    axial
Recommended  precision locknutRequired   locknut force3)
   
axial
    N
Mass
    m
    = kg
dD
    –0,010
B
    –0,25
d1r
    min.
r1
   
min.
Da
   
max.
da
   
min.
dyn. Ca
   
N
stat.
    C0a N
For   radial lockingFor   axial lockingTightening torque4)
   
MA
   
Nm
ZKLN4075-2RS4075345800.6675047500101000ZM40AM4055134120.6
ZKLN4075-2Z4075345800.6675047500101000ZM40AM4055134120.6
ZKLN4075-2RS-2AP4075685800.6675077000202000ZMA40/62AM4055134121.2

Technical Information on Axial angular contact ball bearings

Bearing design


Precision bearings for screw drive bearing arrangements

Axial angular contact ball bearings are precision bearings for screw drive bearing arrangements. Depending on the series, they can support radial forces as well as axial forces in one or both directions. Contact seals protect the rolling element system against contamination and moisture. For higher speeds, non-contact minimal gap seals can be used.


With and without fixing holes

The bearings are available with and without fixing holes in the outer ring. Bearings with holes are screw mounted directly on the adjacent construction. This solution is particularly economical since there is then no need for the locating bore that would otherwise be required or for the bearing cover with the associated matching work.


Available with less stringent tolerances

For some areas of application, a bearing arrangement of lower precision is often sufficient. For this purpose, bearings with less stringent tolerances are available.

1618039131422830.jpg

1618039032117571.jpg1618039170603606.jpg